EM PERFORMANCE 1/7-1/8 ARRMA CENTER DIFFERENTIAL LOCK KIT FOR STANDARD ARRMA 4 SCREWS SPUR GEARS

$49.95

EM PERFORMANCE 1/7-1/8 ARRMA CENTER DIFFERENTIAL LOCK KIT FOR STANDARD ARRMA 4 SCREWS SPUR GEARS

WILL WORK WITH ANY 5 MM SHAFT MOTOR AND CAN ALSO WORK WITH 8 MM SHAFT MOTOR. FOR 8 MM SHAFT MOTOR THE MINIMUM LENGTH OF THE SHAFT IS 26 MM.

PREMINUM QUALITY MACHINING

EM PERFORMANCE REINFORCED SOLID ONE PIECE DIFFERENTIAL LOCK HEAVY DUTY
EM PERFORMANCE REINFORCED DRIVE CUPS HEAVY DUTY

COMPATABILITY:

HOT RACING ARRMA KRATON OUTCAST TALION 50T STEEL SPUR GEAR AON50T

ARRMA ARA8606V5

ARRMA ARA871013

ARRMA AR310429

ARRMA 310978

ROBINSON RACING RRP2640

ROBINSON RACING 2650

INSTALATION TIP:
REMEMBER TO CLEAN THE DRIVE CUPS THREADS AND ALSO THE SCREWS WITH ALCOHOL BECAUSE THEY MIGHT HAVE OIL, YOU CAN USE YOUR OWN DIFFERENTIAL BEARINGS 8 X 16 X 5 MM

 WE RECOMMEND TO USE RED OR GREEN LOCTITE # 290, FOR THE SET GRUB SCREWS AND ALSO FOR THE SHAFT WHERE THE DRIVE CUP WILL SIT. REQUIRES HEAT FOR DISASSEMBLY.
TOOL: WE RECOMMEND TO USE ONLY ALLEN KEYS (5MM) TO TIGHTEN THE SET GRUB SCREWS. DO NOT USE A SCREWDRIVER.

 


 

Category:

Description

 

EM PERFORMANCE 1/7-1/8 ARRMA CENTER DIFFERENTIAL LOCK KIT FOR STANDARD ARRMA 4 SCREWS SPUR GEARS

WILL WORK WITH ANY 5 MM SHAFT MOTOR AND CAN ALSO WORK WITH 8 MM SHAFT MOTOR. FOR 8 MM SHAFT MOTOR THE MINIMUM LENGTH OF THE SHAFT IS 26 MM.

PREMINUM QUALITY MACHINING

EM PERFORMANCE REINFORCED SOLID ONE PIECE DIFFERENTIAL LOCK HEAVY DUTY
EM PERFORMANCE REINFORCED DRIVE CUPS HEAVY DUTY

COMPATABILITY:

HOT RACING ARRMA KRATON OUTCAST TALION 50T STEEL SPUR GEAR AON50T

ARRMA ARA8606V5

ARRMA ARA871013

ARRMA AR310429

ARRMA 310978

ROBINSON RACING RRP2640

ROBINSON RACING 2650

INSTALATION TIP:
REMEMBER TO CLEAN THE DRIVE CUPS THREADS AND ALSO THE SCREWS WITH ALCOHOL BECAUSE THEY MIGHT HAVE OIL, YOU CAN USE YOUR OWN DIFFERENTIAL BEARINGS 8 X 16 X 5 MM

 WE RECOMMEND TO USE RED OR GREEN LOCTITE # 290, FOR THE SET GRUB SCREWS AND ALSO FOR THE SHAFT WHERE THE DRIVE CUP WILL SIT. REQUIRES HEAT FOR DISASSEMBLY.
TOOL: WE RECOMMEND TO USE ONLY ALLEN KEYS (5MM) TO TIGHTEN THE SET GRUB SCREWS. DO NOT USE A SCREWDRIVER.