Sale!

EM PERFORMANCE PREMIUM HOBAO HYPER VTE2 TITANIUM CENTER SHAFT 6 MM ENDS – 8 MM DIAMETER & HoBao OP-0150 MOTOR MOUNT GOOD FIT FOR 1/5 CASTLE CREATIONS 2028 MOTOR

$85.00

INCLUDE:

HOBAO OP-0149 MOTOR MOUNT GOOD FIT FOR 1/5 CASTLE CREATIONS 2028 KV MOTOR OR SIMILAR 

EM PERFORMANCE HOBAO VTE2 TITANIUM CENTER SHAFT 

 

SHAFT REFERENCE # 3H-6

HIGH QUALITY MACHINING

EXTREMELY PRECISE SHAFT WITHOUT  THE NEED TO USE ANY SHIM OR SPACER. CLEAN DESIGN

EM PERFORMANCE PREMIUM 1/8 HOBAO HYPER VTE TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER ) HEAVY DUTY

REINFORCED M5 x 2  6 MM BORE DRIVE CUPS HEAVY DUTY.
YOU WILL NEED TWO BEARINGS 6 X 16 X 5. WE HAVE BEARINGS AVAILABLE FOR PURCHASE HERE
INSTALLATION TIP: SHORT END OF THE SHAFT MARKED WITH A BLUE DOT  NEEDS TO FACE THE REAR DOG BONE. HOBAO USES A LITTLE PIECE OF FUEL LINE IN THE CENTER REAR DRIVE CUP TO REDUCE “BACK-AND-FORTH” PLAY OF THE REAR DOG BONE. YOU NEED TO REMOVE THIS PIECE.
.REMEMBER TO CLEAN  THE DRIVE CUPS THREADS AND ALSO THE SCREWS WITH A GOOD DEGREASER SINCE THEY MIGHT HAVE OIL.
WE RECOMMEND TO USE RED OR GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.
TOOL: WE RECOMMEND TO USE ONLY ALLEN KEYS (5MM) TO TIGHTEN THE SET GRUB SCREWS. DO NOT USE A SCREWDRIVER.
 WE RECOMMEND TO USE GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.

Description

INCLUDE:

HOBAO OP-0149 MOTOR MOUNT GOOD FIT FOR 1/5 CASTLE CREATIONS 2028 KV MOTOR OR SIMILAR 

EM PERFORMANCE HOBAO VTE2 TITANIUM CENTER SHAFT 

 

SHAFT REFERENCE # 3H-6

HIGH QUALITY MACHINING

EXTREMELY PRECISE SHAFT WITHOUT  THE NEED TO USE ANY SHIM OR SPACER. CLEAN DESIGN

EM PERFORMANCE PREMIUM 1/8 HOBAO HYPER VTE TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER ) HEAVY DUTY

REINFORCED M5 x 2  6 MM BORE DRIVE CUPS HEAVY DUTY.
YOU WILL NEED TWO BEARINGS 6 X 16 X 5. WE HAVE BEARINGS AVAILABLE FOR PURCHASE HERE
INSTALLATION TIP: SHORT END OF THE SHAFT MARKED WITH A BLUE DOT  NEEDS TO FACE THE REAR DOG BONE. HOBAO USES A LITTLE PIECE OF FUEL LINE IN THE CENTER REAR DRIVE CUP TO REDUCE “BACK-AND-FORTH” PLAY OF THE REAR DOG BONE. YOU NEED TO REMOVE THIS PIECE.
.REMEMBER TO CLEAN  THE DRIVE CUPS THREADS AND ALSO THE SCREWS WITH A GOOD DEGREASER SINCE THEY MIGHT HAVE OIL.
WE RECOMMEND TO USE RED OR GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.
TOOL: WE RECOMMEND TO USE ONLY ALLEN KEYS (5MM) TO TIGHTEN THE SET GRUB SCREWS. DO NOT USE A SCREWDRIVER.
 WE RECOMMEND TO USE GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.