EMP 132 DRAG RACE 1/8 HOBAO VT TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER ) AND SUPER LIGHT STAINLESS STEEL SPUR GEAR ADAPTER 8 MM BORE

$79.50

EMP 132 DRAG RACE 1/8 HOBAO VT TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER ) AND SUPER LIGHT STAINLESS STEEL SPUR GEAR ADAPTER 8 MM BORE

TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER )
REINFORCE AND HARDENED M4/M5 6 MM BORE DRIVE CUPS
SPECTER EDITION SUPER LIGHT ( DOUBLE TAP ) ( DOUBLE LIFE )  PREMIUM STAINLESS STEEL  SPUR GEAR ADAPTER  8 MM BORE ( REVO PATTERN )
YOU WILL NEED TWO BEARINGS 6 X 16 X 5. BEARINGS ARE AVAILABLE FOR PURCHASE HERE. WILL NOT WORK WITH THE DOG BONES THAT COMES WITH THE CAR. YOU WILL NEED EMP REINFORCED VT CENTER DOG BONES. THIS SHAFT WILL NOT WORK WITH THE STANDARD DOG BONES THAT COMES WITH THE CAR !!
INSTALATION TIP: THE FLAT SPOT IN THE SHAFT WAS DESIGNED FOR THE M4 SET GRUB SCREWS . M5  SET GRUB SCREWS  ARE ADDITIONAL SUPPORT AND  THEY WILL NOT REQUIRE FLAT SPOT .
REMEMBER TO CLEAN WITH ALCOHOL THE DRIVE CUPS THREADS AND ALSO THE SCREWS SINCE THEY MIGHT HAVE OIL.
 WE RECOMMEND TO USE GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.

SHIPPING IS $4 FOR ORDERS UNDER $150 AND FREE FOR ORDERS OVER $150

IF YOU WANT TO BUY PRIORITY SHIPPING CLICK HERE ($6.50, ONLY AVAILABLE FOR ORDERS UNDER $150). OTHERWISE WE WILL USE FIRST CLASS SHIPPING (4 TO 5 DAYS)

 

Category:

Description

EMP 132 DRAG RACE 1/8 HOBAO VT TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER ) AND SUPER LIGHT STAINLESS STEEL SPUR GEAR ADAPTER 8 MM BORE

TITANIUM CENTER SHAFT ( 6 MM ENDS – 8 MM DIAMETER )
REINFORCE AND HARDENED M4/M5 6 MM BORE DRIVE CUPS
SPECTER EDITION SUPER LIGHT ( DOUBLE TAP ) ( DOUBLE LIFE )  PREMIUM STAINLESS STEEL  SPUR GEAR ADAPTER  8 MM BORE ( REVO PATTERN )
YOU WILL NEED TWO BEARINGS 6 X 16 X 5. BEARINGS ARE AVAILABLE FOR PURCHASE HERE. WILL NOT WORK WITH THE DOG BONES THAT COMES WITH THE CAR. YOU WILL NEED EMP REINFORCED VT CENTER DOG BONES. THIS SHAFT WILL NOT WORK WITH THE STANDARD DOG BONES THAT COMES WITH THE CAR !!
INSTALATION TIP: THE FLAT SPOT IN THE SHAFT WAS DESIGNED FOR THE M4 SET GRUB SCREWS . M5  SET GRUB SCREWS  ARE ADDITIONAL SUPPORT AND  THEY WILL NOT REQUIRE FLAT SPOT .
REMEMBER TO CLEAN WITH ALCOHOL THE DRIVE CUPS THREADS AND ALSO THE SCREWS SINCE THEY MIGHT HAVE OIL.
 WE RECOMMEND TO USE GREEN LOCTITE # 290. REQUIRES HEAT FOR DISASSEMBLY.

SHIPPING IS $4 FOR ORDERS UNDER $150 AND FREE FOR ORDERS OVER $150

IF YOU WANT TO BUY PRIORITY SHIPPING CLICK HERE ($6.50, ONLY AVAILABLE FOR ORDERS UNDER $150). OTHERWISE WE WILL USE FIRST CLASS SHIPPING (4 TO 5 DAYS)